performance parts (hmmm..)

engine damper..this thing just bought coz somebody sell it very cheap..absorb vibration and reduce mounting wear..


this thing also somebody sell very cheap so i bought it...

performance parts (fuel system)

adjustable fuel regulator..aerospeed twin diaphragm with oil meter gauge and and feul rail adapter..i dun like to used this type of regulator but i give a try...

Evo3 fuel injector..510cc n each has twin tip nozzle spray..

walbro 255 lph fuel pump GSS342

4Wheel Drive fuel tank from GSR

performance parts (induction)

induction system i excluded the turbo coz it can be viewed at exhaust performance parts..here is a custom intake magnifold and it is designed by my brother 'yem'..how ever it is a prototype part and we dun no how it performance..we were just custom it n try to do our best for it


sard R2D2 blow off valve..

VR4 front mount intercooler with DIY stainless stell piping

K&N air filter 6" with 4Gseries adapter

Evo3 airflow sensor..to provide higher Hz signal to ECU and large volume of air

performance parts (exhaust system)

here is the tonnka exhaust magnifold...its 2.8mm metal thickness n much more heavy duty..

berat skit beb banana nih....

TDO5 16G big from VR4RS twin blade..just made a reserch it is same turbo for evo 1&2 cfm 505 1.89" compressor inducer and 2.68 exducer..turbine trim is 50 and 2.2 in of it exducer.. code no: 420

at the moment i just used thai waste gate or known as ayam cap waste gate..it 38mm and tested that it has 1 bar spring rate..which the valve open at 1 bar...

performance parts (cam)

aerospeed adjustable cam pulley...at first i bought this second hand for rm250.at the end i found that the color was really dull and also not equipped with spring wahser on the adjusting bolt..then i sell off that one and bought brand new P2R adjustable cam pulley purple in color and have a spring wahsers at all adjusting bolts, it will give more reliability and security of the pulley..

P2R adjustable cam pulley..with spring washer..

another view...intake and exhaust camshaft were wrapped to prevent from corrossion..hydraulic lifter also require to be bleeded so then all containminated engine oil removed..all parts were cleaned with diesel fuel before installation..

O-ring for cam angle sensor renewed and camshaft holder including attachment bolt also cleaned

before installation...

performance parts (stroker)

i choose ACL thrust wahser

ACL Aluglide main bearing

KING connecting rod bearing CA 18..for high boost and realibility..another reason is only this brand available for CA18 con rod..plus i must used this bearing due to different key compare to 4G93 bearing..so no choice

Nissan CA18 DET connecting rod..different between this rod with 4G93 will be explained in later post..

81mm 4AGZE toyota supercharger piston with seramic coating on top..compression ratio is 8.0:1 on 4AGZE engine..brand ART semi forged as claimed by toyota factory..how ever there is some rumor saying that it is not forged material..what ever it is i have to used it n test to the max..diff beteen CA18 and 4G93t piston will be posted later..

RIK made in japan piston ring....

sowa 1.5mm metak gasket made in japan..u can see the different where there is glue coating in black color around the gasket..it will give batter contact with cylinder head and block..

walbro fuel pump

walbro 255 lph fuel pump

before installation , walbro is a bit longger in lenght..the has been tested n satisfied

i cut off the pressure line to fit walbro outlet port which is was 7mm diameter.see above picture before i cut the pipe..

this is a picture after installation on the pump bracket.