Had you ever experience blow out or loose of intercooler piping? here one of the idea on how to secure the piping during high boost. i used a lock wire for the attachment.
something to note is that these are not really a good clamp the piping as they are not provide uniform pressure at all area, so care must be taken to ensure leak at high boost.
locking the intercooler piping to turbo outlet housing.
intercooler to throttle body
at one time I had the turbo flange bolt came loose. then i used lock wire to prevent them from rotating to open direction.
these are the bolt and required to drill a hole
then wire them up. since that i had no more loose bolt and piping.
No comments:
Post a Comment